How to Fix a Deadboot and Hardbrick
Cherry Mobile Flare Lite
Requirements
- SP Flash Tool
- MTK Drivers
- MTK Droid Tools
- Computer
- Backup Rom (Not Flashable)
- Common Sense
- Brain please
Note
Instructions
Part A. (Creating flashable rom via MTK Droid Tools)
Part B. (Flashing Rom via SP Flash Tool)
Part C. (Preparing for Resurrection XD )
Credits
- Also applicable for those Unrooted Phones with MTK Chipsets..
- Install first the Drivers.
- If you already have a Flashable ROM, proceed to Part B.
Instructions
Part A. (Creating flashable rom via MTK Droid Tools)
- Download and extract the files
- Install MTK drivers
- Open MTK Droid Tools(Run as Administrator)
- Click Scatter from file
- Then find the folder where you place your nandroid backup
- Click firmware.info then open then rename mo yung text File ng MT6572_Android_Scatter
- Click "Yes" when a dialog appear.
- Go back to MTK Droid Tools and Click root,back,recovery (Beside Phone Information)
- Then click "To prepare blocks for FlashTool"
- Locate again the folder where you place your nandroid backup
- Click "file" and open it and wait until MTK Droid Tools is Done
- Your Flashable rom is inside the folder of your nandroid backup with the folder name "!Files_to_Flashtool"
Part B. (Flashing Rom via SP Flash Tool)
- Install MTK Drivers first(For user who downloaded the flashable rom in this group)
- Extract all required tools that are zipped (For user who downloaded the Flashable ROM in this group)
- Open SP Flash Tool(Run as Administrator)
- Click Scatter-Loading
- Find the folder of your flashable rom and open it(!Files_to_Flashtool folder)
- Click MT6572_Android_Scatter and open it
- Select Format all + Download
- Wait until loading is finished then click download
- Turn off your phone and pull off the battery
- Connect the phone without battery to pc
- If the loading bar turns red it means SP Flash Tool detects your phone
- Then put the battery to your phone
- If the loading bar turns yellow it means SP Flash Tool is flashing your recovery
- Wait until flashing is done
- When the flashing process is finish, Disconnect your phone from pc
Part C. (Preparing for Resurrection XD )
- Put off the battery and put it on again
- Then hold Volume up(+) button and power button
- Then select recovery mode
- Select Wipe Data and Factory reset, Click yes
- Select Wipe Cache Partition, Click yes
- Reboot and Done! Buhay na si phone mo
Credits
hi my nandroid backup doesn't have firmware.info???
ReplyDelete